Renault Captur I airbag control unit repair

What is a Renault Captur I airbag control unit?

The Renault Captur I airbag control unit is the central safety unit that activates all occupant restraint systems in the event of an accident. It precisely monitors signals from impact sensors, stores relevant crash data, and, through its internal electronics, ensures the proper and rapid deployment of all connected airbag modules and seatbelt pretensioners in the vehicle. This is crucial for occupant safety.

This sophisticated module acts as the brain of your Renault Captur I's passive safety system. It precisely and reliably coordinates the functions of various airbag modules, such as the driver, passenger, and side airbags.

Data communication takes place via special, yellow-marked connectors designed for maximum safety and reliability. The control unit also stores important diagnostic data for the workshop and signals malfunctions with the indicator light.

Why is the Renault Captur I airbag control unit defective?

A Renault Captur I airbag control unit is often defective because, after an accident, it stores crash data that cannot be erased, causing it to lock up and stop functioning. Internal hardware or software errors caused by voltage spikes or aging can also cause a failure and necessitate a Renault Captur I airbag control unit repair.

After a severe impact, the control unit stores indelible crash information and locks itself for protection. This is a primary reason why the control unit does not allow new deployments and the airbag light remains permanently illuminated.

Other causes of failure may include internal errors in the microcontroller or memory, signaled by error codes such as B107C or B1034. Such defects impair the functionality of the airbag system and require professional diagnosis.

Common error codes for Renault Captur I airbag control unit repair

When a Renault Captur I airbag control unit needs repair, error codes such as B1000 for communication problems or B107C/B1034 for internal defects are typically read out. After an accident, codes such as 90B4/DF129 or DTC36991, which indicate a locked control unit or indelible crash data, are particularly common.

• B1000 → Control unit communication error → Fault in the connection to other systems or the diagnostic device.
• B107C → Airbag control module internal error → Indicates software, memory, or hardware problems in the module.
• B1034 → Software or memory error → A defect within the control unit's internal software or data memory.
• 90B4 (DF129) → Control unit lock after accident → The system is blocked and deactivated after a crash.
• 9080 (DF001) → Control unit locked after accident → A permanent deactivation of the airbag control unit after deployment.
• DTC36991 → Stored crash data cannot be erased → Often requires replacement or specialized repair of the module.
• C1605 → Control unit malfunction → A general hardware defect or a serious malfunction of the airbag control unit.

What part numbers are available for the Renault Captur I airbag control unit repair?

For the Renault Captur I airbag control unit repair, several 100% verified OEM part numbers are crucial, including 985100475R, 985107400R, and 985105123R from Renault, as well as A2C80613411 and MLV17034649 from Continental. These numbers guarantee compatibility with the 2015-2018 model year and various engine versions, which is essential for a successful repair.

• 985100475R - Original Renault OEM
• 985107400R - Original Renault OEM
• 985105123R - Original Renault OEM
• A2C80613411 – Continental (OEM supplier)
• MLV17034649 – Continental (OEM supplier)
• 985105725R - Original Renault OEM